How To: DIY Ballroom Skirt…from a Shower Curtain

0.diyshowercurtainskirt_introphoto

“Make the workmanship surpass the materials.”

-Ovid

I absolutely love using unconventional materials in my DIY’s. To me, any and everything could be used for a wearable – and I never hesitate to question “Could I use that?” if I find a texture, shape, or pattern interesting. Anywhere, even the Home Depot, Wal-Mart, or garage sales – could offer up a potential material that could be used for a DIY. Some of my favorite past DIYs include these unconventional materials, including my DIY 80’s Acrylic Earrings from a Photo Frame, DIY Lace Maxi-Skirt from a Curtain, DIY 40’s-Style Kitty Beret from a Pirate Hat, DIY Bolo Tie Style Necklace from a Shoelace, and DIY Boho Bangles from Curtain Rings.    familyjewels_showercurtainEnter the unassuming polyester shower curtain. From a pin on Pinterest I found this gorgeous gemstone pattern (above) – and followed it to UrbanOutfitters.com where I found it was actually a shower curtain by a company called Family Jewels, a Danish interior design company. (And it’s still available for purchase!)

Family Jewels Diamond Shower Curtain, $44.99 (sale)

I loved the pattern so much I couldn’t resist the opportunity to do something amazing with it – so I snapped it up and waited impatiently for it to arrive. When I opened the package I found that it was made of a stiff, somewhat waterproof polyester, which to me felt a bit like a stiff satin or taffeta…which got me thinking ballroom skirts. Billowy, poufy, elegant – and perfect for holiday parties! So I set about making my own. Here’s how I did it:

You Need:diyshowercurtainskirt_4

1 shower curtain  /  fusible lightweight interfacing  /  iron + ironing board  /  scissors  /  pins  /  marking chalk  /  measuring tape  /  matching thread  /  sewing machine + needle for lightweight polyester  /  9″ long invisible zipper  /  overlocker or serger (optional)

How To: *sorry no photos of the process/materials, since I actually made the skirt at about 1 AM in my living room!

1. Basically, I followed this tutorial here for the making of the skirt, so full credit needs to go to Gertie’s Blog for Better Sewing. HOWEVER, make sure that when you cut you do it on your fabric that is folded over, so you are cutting 2 of each pattern piece and the waistband is one long length since it was cut on the fold (it escaped my notice until Part 2 of the tutorial, which was entirely my fault.) For my skirt, my measurements were: 41″ long and 32.5″ high. My waistband was 32″ long and 4.75″ high. (Both including about 0.5″ of seam allowance.) I also utilized the finished edges of the shower curtain in my cut piece so that I would have less overlocking to do.

2. I then overlocked all raw edges, except those that would be hidden inside the waistband.

3. Then, I followed Part 2 of the tutorial for the construction of the skirt. diyshowercurtainskirt_2It came together quite quickly and I made it in about 2 hours the night before I had to go to the airport to go to the 3-day Lucky FABB event in October!

When I attended Lucky FABB, my DIY Ballroom Skirt from a Shower Curtain caused quite a stir, with bloggers stopping me to ask me where I got it, and Erica Domesek of P.S. I Made This even going so far as to compliment it when I asked a question to her during a panel. (!! what a moment!!)

This skirt also looks amazing when worn over a crinoline or a petticoat so that it has even more stiffness and stands away from the body more. If you are in the market for a new ballroom skirt like this one, definitely check out home decor stores now: with it being the holidays, shimmery, sequinned, sparkly shower curtains are readily available…and much, much cheaper than buying a skirt ready-made. diyshowercurtainskirt_3diyshowercurtainskirt_1How about you? Have you ever used unconventional materials for something that turned out much better than you hoped?

Do tell!

Happy DIY’ing!

xo Carly

Save

Leave Comment

DIY Bell-Sleeve Coat Dress and Sweet Dress Book Review

sweetdressbook_coatdress1 Laurence King Publishing (the same publishers of the incredibly useful DIY Couture by Rose Martin) recently were gracious enough to send me a copy of their newest sewing book, Sweet Dress Book: 23 Dresses of Pattern Arrangement by Yoshiko Tsukiori. sweetdressbook_cover2Translated from the Japanese, this pattern book features 23 tutorials for making a variety of blouses, tops, dresses, cardigans, and even shorts – all engineered from a basic 6 patterns with different darts, flounces, and lengths to switch up the silhouettes. (more…)

Leave Comment

DIY Laced-Up Sunday Tee Upcycle from Hapy Friends Shoppe

0.lacedupsundaytee_introphotoAiko Miyako started her blog Hapy Friends Shoppe last year, sharing DIY tutorials for adorable plushies and sweet, lacy pieces that look so pretty paired with pastels and structured blazers. Today she is joining us to share her DIY for a Laced-up Sunday Tee here on Chic Steals. It’s a great project to breathe life into an old T-shirt or tanktop and give it a bit of feminine flair. Take it away, Aiko!


finalproduct

Before and After of the T-Shirt

Why hello there everyone! My name is Aiko and I am going to share a simple DIY project perfect for Sundays! We will be making this sweet looking laced up T-Shirt. This is a simple project and is a great way to recycle old pieces and turn them into something new. Lace is a beautiful accessory to add to your plain T-shirts and dresses  as it gives a romantic, vintage feel which I absolutely adore. This method can be re-created on longer T-shirts depending on preference.

Difficulty level: Intermediate

Things you will need: Old T-Shirt (short or long)  /  Scrap lace  /  Scissors  /  Needle  /  Thread in the similar colors to your fabric  /  Pearl beads

tutorial11.) Prepare any kind of T-shirt preferably a plain one. I used an old cropped tee I had lying around. Straighten the T-shirt out, leaving it flat on the floor.

2.) Prepare some scrap lace. In my case, I used scrap lace I had from a previous project. You will want to measure out the lace slightly more than the width of your T-shirt.

3.) Leave your shirt right side up and we are ready to start sewing.

4.) Line the lace parallel with the bottom of your T-shirt and sew 2cm (about 3/4″) above the bottom. Remember to hem the edges so that you have a neat line.  (sewing machine only)

5.) If you are hand-sewing the lace on, grab both ends as shown in picture 5. Sew right at the bottom, using blanket stitching. This is a simple and fast method of hand sewing two pieces together and it creates a sturdy finish.

6.) Now let’s create some pretty pleats. Depending on how intricate you want your pleats to be, space them out and start folding the lace as shown in the picture. Sew onto the fold and you are done!  Make sure you snip off any excess and hem the edges of the lace.

7.) This is what you should have once you are done with the lace. I only sewed lace on the front side of the T-shirt to give it some edge and left the back bare.

8.) Let’s pretty up this T-shirt. I used pearl beads to create fake buttons and sewed them on by hand using a back-stitch.

9.) Finally, I took some remaining scrap lace, folded it in half, and placed it at the top of the T-shirt. Sew it on using a back stitch and voila! You are done.

finished1Pair this blouse with a pair of distressed jeans shorts for some edge, slap on a straw hat and be on your way to a perfect Sunday picnic by the lake!

Thank you so much gorgeous people for having me here! It has been a blast!
Xoxo
Aiko

headshotAiko Miyako has been blogging and sharing videos on Youtube for a little over a  year now under the name Hapy Friends Shoppe. Her blog is built around fashion and craft, starting off with sharing little plush projects on her blog and YouTube channel. Once that took off, she decided to add more content to her blog by posting outfits inspired by the things around her. She adores fashion and DIY projects because she is able to share the things that she loves in hopes to inspire others.

Blog  /  Youtube  /  Facebook  /  Twitter  /  Instagram  /  Chictopia

Leave Comment

DIY Tribal-Print Festival T-Shirt with boohoo

0.chicsteals_DIYtribalprintshirt_introphotoTo mix and match with destroyed denim cutoffs, favorite jeans, or a soft, loose maxi-skirt…the ultimate piece of festival wear is the versatile T-shirt. Take yours a step further with your own DIY print and some well-placed studding to complement the print. boohoo makes the softest, drapiest, most versatile tees – just perfect for customizing with your own hand-made print. And it’s super-easy to make a #boohooDIY with some sticky foam, soft fabric paint, and some pyramid studs!  Here’s how:

You Need: (more…)

Leave Comment

DIY Memorial Day and Labor Day Dress Made from a Sheet – Finally, the Pattern!

Awhile ago I posted some photos of a dress I made for my Labor Day Party – which was nothing more than a sheet cut apart and sewn together artfully to make a finished dress.

I made it from a light chambray-colored sheet I found at my local Goodwill, cutting it apart in a way to utilize the finished hems. 

It’s breezy, nautical, and chic – a perfect way to end the Summer…or commemorate the START of Summer on Memorial Day!

So what I made it for Labor Day…I think it works equally well as a breezy dress no matter what the day – so I’m wearing it for my Memorial Day barbecue too!

Download the DIY Labor Day Cascading Ruffles Bedsheet Dress Pattern (354 KB)

Whether it’s Labor Day, Memorial Day, or any other day, this pretty dress with cascading ruffles can be customized to any style depending on your sheet and your use of trims; mine is a chambray sheet with striped grosgrain ribbon trim and rope ties; you could also do a white sheet with lacy trim and satin ties for a completely different look!

Any questions on the pattern/instructions – let me know! I’m happy to help:-)

Happy DIY’ing!

xoxo
Carly

Leave Comment

Pin It on Pinterest