Aug 5, 2009 | DIY
Love the necklace. Yes, love. And $45 isn’t really that bad a price. It supports an up-and-coming designer, fosters cottage industry, stimulates the economy, yada yada yada. But, I just happened to have a whole bunch of wooden beads laying around…and some ribbon…and a little paint… So, you guessed it, I DIY’d my own. Sorry Adia! Here’s how…
You will need:
-27 beads in small, medium, and large sizes (I used wood because that’s what I had, and I painted them white, oyster, marigold yellow, and charcoal gray, and then sealed them with gloss Mod-Podge…though in retrospect, spray-painting would have been easier and made the color more uniform)
-2 yd double-face matte ribbon (I had single-faced, and that means that the underside of the necklace is more obvious than if the 2 sides were the same. I also used shiny satin, which I like; the designer version uses matte.)
-thread, same color as your ribbon (I used black and it’s a little obvious)
-fabric glue
-needle
How To:
Start by triple-knotting a double-length of thread onto your needle. Push needle into center of ribbon about 8″ from one end. String on a small bead on the UNDERSIDE of your ribbon. This will create a little hump underneath the ribbon. Push needle into center of ribbon just beyond that bead, and bring to front.
Thread next bead on, and so and so forth, alternating beads. You can also go in and out with the needle a few times to anchor your beginning bead strongly at the the top of the necklace.
Once you’ve added all the beads on, alternating sizes, anchor your last bead in, and knot and cut your thread. Then apply fabric glue to about 1/2″ of the front of the ribbon, right at that thread knot at both the beginning and the end of your threaded beads. Fold ribbon over (we’re trying to disguise that thread, just to explain), press, and allow to set. I also hand-stitched under that fold to make sure it was secure, on both sides.
Cut the ends of your ribbon to the length you want, glue together and then fold over to disguise the ends in a similar manner. Hand-stitch again, to secure.
I really love the design of this – it’s elegant and simple. (Hub says it looks like I’m getting married in Hawaii at a traditional-style wedding….They place a similarly-threaded kukui nut-and-ribbon necklace on the groom instead of a flower lei in some situations. Well, I’m not getting married in Hawaii…we got married in Hawaii!! 5 years ago! Hello??!!…and Hub was not adorned with said kukui nut necklace. Well, now I’ve made him one, apparently – we can have a do-over.)
Happy DIY’ing!
xoxox
Carly
Save
Leave Comment
Aug 1, 2009 | DIY
Get This Tutorial As a PDF
This tutorial has been updated, and is now available as a full step-by-step with photos in my new book 7 DIY Men’s Shirt Makeovers, part of the DIY Men’s Shirt Makeovers System. Download this tutorial for free, below.
OR 2 Days to Make the DIY Dress from a Shirt; 4 Weeks to Write the Tutorial…
Isn’t that how it always is, for goodness’ sakes??
This is a DIY dress made from a chambray shirt by
Urban Renewal, a division of Urban Outfitters that refashions clothing into salable, new pieces. What a great idea! I came across it on
Outsapop.com, who didn’t seem to think much of the design. It really appealed to me as a cute summer dress, and I really wanted one too!
I found a men’s striped Dockers work shirt to play with – which gave me some great raw material for this project. If you have a guy in your life who’s parting with any of his button-down shirts (or you feel like thrifting one for cheap at the local Goodwill), you can DIY your own dress from a men’s shirt easily!
HOW TO MAKE A DIY DRESS FROM A MEN’S SHIRT
Note 5/2020: This tutorial has needed a major overhaul since I’d originally posted it way back in 2009. I’ve refined making this dress in the years since, so the step-by-step is much quicker, easier, and results in a perfect dress that will stand the test of time (and multiple washings in the washing machine!) You can now get this dress for free (no obligation) in PDF format by clicking below. Thanks!
Get This Tutorial As a PDF
This tutorial has been updated, and is now available as a full step-by-step with photos in my new book 7 DIY Men’s Shirt Makeovers, part of the DIY Men’s Shirt Makeovers System. Download this tutorial for free, below.
Plus, I made some accessories from the leftover shirt fabric, but that’s definitely, definitely another post! Hope you have as much fun making your dress as I did!
Enjoy your summer!
Leave Comment
Jul 13, 2009 | DIY, Fashion
(handmade DIY dress, Icing by Claire’s belt, Newport-News patent clutch, Forever21 ring, Nine West heels)
So, it’s been awhile since I’ve done an outfit post…what with being sick, feeling down, and just not having the physical and mental fortitude to sit in front of the computer and edit hundreds of photos means no outfit updates. I’m sure you’re all very upset. 🙂
And yes, I edit every single one of the photos Hub takes…I Photoshop Blake Lively’s head onto my body. Or vice versa. ‘Narf. (And if you get that reference, you’re a total 80’s cartoon dork just like me.;-)
So this is a dress I made awhile ago, for that infamous FashionTribes post about DIY’ing your own designer-style painterly garment…and it was never posted on the site. Harrrumph.
So I styled it on my own.
I made the dress using Simplicity 3747. I altered the pattern to create a voluminous pleat in the front (Hub says it looks like maternity wear – totally not my intention), made an A-line shape to the skirt, and extended the lining so that it shows at the bottom. Hub also says the shape of it looks like something a patient would wear at a psych ward. (Read: neck a little too wide, shoulders shapeless, large and baggy and white.) It looks much better when belted. Maybe I shoulda stuck to the pattern? But I definitely wanted volume – very 2009.
And then I painted brushstrokes on the bottom using Tulip brand matte soft fabric paints (they don’t dry completely stiff and hard like most fabric paints, but they still, IMHO, add a little too much stiffness to the fabric for it to look “natural.”) These are really carefully done…and I had to do it twice to get it just right. I used Ebony, Lime, and Cornflower Blue, if I remember correctly.
This is the coolest ring from Forever21…it has tiny purple beads in the center…it’s like a little alien pod.
I think I’ve written that before. Man, I’m getting old.
NineWest gold Joisey-girl heels. They make my feet look like the Jolly Green Giant’s.
(in size LOL)
-Carly J. Cais
Oh, sorry – and the title of this post…well, if you were a teenage girl in the early nineties (’91, I think?)…you definitely went to see this movie. Guys stayed far, far away. This was before dude lost most of his hair and became obsolete (read: made an overblown, ridiculous production with Dennis Hopper). And before other dude decided to marry his 27-yr old granddaughter (or so says the Enquirer or some schlock as of late). Hmmm…can you tell I was a film major?? LOL
Jul 9, 2009 | DIY
I’ve been DIY’ing my heart out over here – and I meant to post this on the 4th of July, but as usual, I’m behind. So here it is, this safety-pinned tank, inspired by one I saw in a Japanese mag of yore:
You need:
*1 white tank top (2×1 rib)
*40 black small safety pins
*20 silver medium safety pins
*2 soft-feel iron-on transfers (I chose a black eagle, not because I wanted to, but because they were the only black iron-ons at the store. Jo-Ann’s, I curse you!!)
DIY It:
Easy peasy. Use a seam ripper and blunt scissors to slash one of the shoulder-straps in the center. Pin the slash and around the neckline of the tank with the black safety pins, haphazardly, crossing them over, etc. Add some silver ones for visual interest (I folded down and scrunched the other side too, just for the helluvit.) Transfer both iron-ons following the directions. Hand-wash. Or never wash. Whichever.
Punk? Yup. Patriotic? Kind of – not intentionally. But I thought it appropo for the 4th, so that’s what I wore.:-)
Hope you guys had a happy 4th! (That is, if you celebrate US holidays…;-)
-Carly
Save
Leave Comment
Jul 6, 2009 | DIY
Designers appear to have reached into their desk drawers for inspiration this spring, pulling out the New Wave accessory du jour: staples, pins, and zippers utilized in a variety of different ways: exposed, in contrast-color, haphazardly applied as trim, or twisted into 3D shapes. Interestingly, the largest zipper manufacturer in the world, YKK, was one of the official sponsors of Mercedes-Benz Fashion Week in NYC (even the lanyard for the press badge was a zipper). From the staples on Victor & Rolf’s beautifully cut wool jackets to Sex Pistols-style safety pins and cheeky punk jewelry by Tom Binns – thanks to this hot 2009 trend, low is the new high, and the functional…fabulous.
The hardware-heavy, craftsy felt-flower cuff by Marc Jacobs inspired us to staple, zip, and pin our own…here’s how:
WHAT YOU’LL NEED:
– large piece of stiff black felt (8.5″ x 11″)
– black thread
– decorative thread or staples in gold (check the scrapbooking section of the craft store)
– 1 decorative button
– heavy-duty gold snaps (2 sets)
– gold soutache braided trim
– 1 heavy-duty jacket zipper (black with gold teeth)
– gold safety pins (1 large, 15 small)
– clear, flexible plastic (like from a vinyl tabletop cover)
TOOLS:
– snap setting pliers/hammer+die for the snaps
– stapler
– needle
– felt or fabric glue
INSTRUCTIONS:
1. MAKE THE PARTS Cut the felt into 2 abstract, oblong flower “petals” 2 flower “petals”. To make the triangle-shaped petals, cut the plastic into 2 diamond shapes. Cut the zipper into 3 lengths, each piece measuring 10″ long. Fold each length in the center to make a rounded petal shape; secure the inside with 2 gold staples (or hand-sew stitches in decorative thread).
2. MAKE THE CUFF AND BASE From the felt, cut out the base of your flower parts: a circle measuring approximately 1.25″ in diameter. Then cut a 2″ wide strip that is long enough to go around your wrist plus a 3/4″ for overlap for the snaps. Use snap-setting pliers (like Dritz), or hammer and die to set 2 snaps (and their counterparts) into the ends. Because they are strong, we chose shanked snaps; alternatively, you could use sew-on snaps.
3. ADD THE EMBELLISHMENT Using a needle and thread, hand-sew your parts onto the felt base. Start with a felt petal, then a zipper petal, then a plastic petal in a corkscrew design; repeat, attaching each new petal on top of the previous one. Wind the braided trim in and out of the petals in a figure-8 pattern, securing in the center with a few stitches. Then hide all of your stitching with a button sewn into the center. Pin safety pins haphazardly around the edge of one of the felt petals; thread 10 smaller pins onto the larger pin and attach. Complete the look by adding yet more staples or decorative thread.
4. ATTACH BASE TO CUFF Glue felt base to the center of the cuff. Secure further by sewing around edge of the circle base with decorative thread.
To let the cuff rock out on its own, wear with something demure…or do a full-on Marc Jacobs style, with a nipped-in shrunken jacket, mismatched obi belt, super-long denim pencil skirt, and teeny porkpie straw hat set akilter.
Still have questions? Email me at CarlyJCais AT FashionTribes.com. Otherwise, happy DIY-ing!
– Carly J. Cais
(runway photos via style.com)
(As posted on FashionTribes.com)
Save
Leave Comment
